Title
CONSIDERATION AND AWARDING OF BID 1617-14A FOR THE PURCHASE OF AGGREGATE AND STONE FOR THE STREET MAINTENANCE AND STORM WATER DIVISIONS.
1. CLASS B BEDDING MATERIAL
2. #1 WASHED CHIPS
3. CONCRETE SAND
4. AGGREGATE BASE, TYPE A
5. TRAFFIC BOUND SURFACE COURSE, TYPE A
6. KILN DUST
7. SELECT BORROW SUBGRADE MATERIAL
8. AGGREGATE BASE, TYPE B
9. 3-INCH SURGE ROCK
10. 8-INCH RIPRAP
11. 12-INCH RIPRAP
12. 18-INCH RIPRAP
13. TOPSOIL
A. PICKUP
B. DELIVERED
14. MANUFACTURED SAND
Body
BACKGROUND: The City of Norman Street and Stormwater Maintenance Programs utilize the following aggregate and stone on a regular basis throughout each year:
Section 1. Class B Bedding Material is used as bedding material and backfill for stormwater pipelines.
Section 2. Aggregate size #1 Washed Chips are used as the cover aggregate for bituminous surface treatments (i.e., chip sealing). This is the base course for a double bituminous application.
Section 3. Fine Aggregate for concrete, Concrete Sand, is used in the snow and ice control program.
Section 4. Aggregate Base, Type A, is used as base material for pavement construction. It is also used to stabilize an unimproved section line road.
Section 5. Traffic Bound Surface Course; Type A, is used as the surface course of a gravel roadway. It provides a suitable gradation or blend of coarse, medium and fine aggregates for the construction of a gravel roadway surface.
Section 6. Cement Kiln Dust is used in subgrade stabilization operations.
Section 7. Select borrow Subgrade material is used as embankment and causeway fill in roadway reconstruction operations.
Section 8. Aggregate Base Type B is used to stabilize unimproved rural section line roads comprised of sand and fine silt. It is also used as a component of a filter blanket beneath riprap for stream bank and channel erosion control.
Section 9. 3-inch Surge Rock is used to stabilize unimproved rural section line roads comprised of sand and fine silt. It is also used as a component of a filter blanket beneath riprap for stream bank and channel erosion control.
Section 10, 11, 12. Riprap is used for stream bank stabilization, erosion control in drainage ways, and flood damage control. It is purchased in 8-inch, 12-inch and 18-inch diameters.
Section 13. Manufactured Sand is coarse sand for winter ice control and job site concrete mixing.
Section 14. Topsoil is used when the right-of-way is damaged during construction and grass replacement is required.
Quantities of aggregate materials purchased annually will vary depending on individual project scope, unscheduled repairs and maintenance activities. A total of 8,011.15 tons of a combination of these products were purchased in FYE 2016.
DISCUSSION: Bids were sent to eight (8) vendors and Bid 1617-14A was opened on September 29, 2016, with five (5) vendor bids received for aggregate and stone. The average unit price of these materials decreased over the 2016 bid price by 3% reportedly due to the decreased manufacturing and fuel related costs. If approved, the purchase contract for these materials is effective through October 31, 2017. Funding for the purchase of the various aggregate and stone materials is provided in various accounts in the General Fund for maintenance and operations uses and the Capital Fund for scheduled capital projects.
Funding for the materials is available in the following account numbers:
Street Maintenance Division
010-5021-431.32-17 Weatherization - $ 36,290
Storm Water Division
010-5022-431.33-03 Rock/Sand Materials - $ 15,000
Capital Improvement Projects FYE 2017
050-9906-451.63-01 Force Account Drainage Materials - $ 40,000
050-9696-431.63-01 Rural Road Improvement - $ 250,500
RECOMMENDATION: Staff recommends BID-1617-14A be awarded to the low bidder as shown on the Bid Tabulation. We further recommend that the bid also be awarded to the alternate bidder and tertiary bidder so that the material will be available when the primary bidder cannot deliver it.